Pages

Thursday, May 22, 2014

♥Setyoufree PTU♥

This tutorial was written by me on May 22th, 2014. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components. 
SUPPLIES:
Plug-in used
Eye Candy 4000 Gradient Glow For Name (Optional)
Xero porcelain
  Xero-Soft Vignette
Muras Meister Copies
Xero Fritillary
 I used the artwork of Amy BrownYou have to be licensed to use this
artwork and it can be purchased Here
  *Scrapkit Of Choice*
 I am using the Awesome PTU kit "
You can find the tutorial
Hope you enjoy!
LeadMeHome- Tagger" by  HonoredScraps
And can be purchased ~ HERE
Thank you Patty for making such wonderful kits to create with :)
And Check Her other Kits HERE
 ♥
Let Start
Open New Blank Canvas by 600x250
1.Select all, Selections - Modify - Select Selection Borders, inside 6
Add a new raster Open up your Paper_06,Keep Selections,
Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

2.Select all, Selections - Modify - Select Selection Borders, inside 3
Add a new raster Open up your Paper_07,Keep Selections,
Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

3.Open up your Element_22 copy and paste as new layer
Apply Muras Meister Copies with setting below,Duplicate
Go on the Original Layer Adjust - Blur - Motion Blur Angle-90 and strength-100%,
Go on Copy Layer Adjust - Blur - Radial Blur with setting below,
Apply Effect - Edge Effects - Enhance More,
Apply Xero Fritillary with settings below Change Blend Mode to Screen,
Apply Xero-Soft Vignette with settings below
Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .





4.Open up your tube resize 70%  ,Apply Xero porcelain set at 50/128/128/0/0/255,On the duplicated tube layer, adjust, blur, Gaussian Blur set to 4
Layers, properties, change blend mode to screen,Apply DropShadow..Vertical & Horizontal 0, Opacity 50, Blur 5,Shadow on new layer - unchecked.
Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

5. Now you can add your white rectangles by using your rectangle tool
Draw out your rectangle.Convert to raster layer Change the opacity to about 50
Selections Select all Selections Modify Selection borders -both sides -width1
Add new layer flood with white Add noise of choice
Select none
Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

6.Open up your Element_62 copy and paste as new layer resize 50% duplicates Image Mirror,
Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

7.Open up your Element_65 copy and paste as new layer resize 50% duplicates Image Mirror,
Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

8.Open up your Element_11 copy and paste as new layer resize 50% duplicates Image Mirror,
Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

9.Open up your Element_23 copy and paste as new layer resize 50% duplicates Image Mirror,
Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .
 Add the name and copyright info

Saturday, May 17, 2014

♥SailAwayWithMe♥

 
This tutorial was written by me on May 17th, 2014. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components.

*Scrapkit Of Choice*
 I am using the Awesome PTU kit "
Sail Away - Tagger" by  MellieBeans
And can be purchased ~ HERE

 Thank you Mellie for making such wonderful kits to create with :)
And Check Her other Kits HERE
 ♥
Let Start Open up 700x700 Blank Canvas.
1.Open up your element 30 Copy and paste as new layer resize 70%,Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

2.Open up your frame1 Copy and paste as new layer resize,take your magic wand click inside expand by 7 Open up your paper05 selections invert delete,

3.Open up your element 34 Copy and paste as new layer resize 50%,Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

4.Open up your element 29 Copy and paste as new layer resize 50%,Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

5.Open up your wordart2 Copy and paste as new layer resize 50%,Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

6.Open up your element 11 Copy and paste as new layer resize 50%,Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

7.Open up your element 32 Copy and paste as new layer resize 50%,Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .
Hope you enjoy!

Saturday, May 10, 2014

♥Some Beach♥

 
This tutorial was written by me on May 5th, 2014. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components. 
SUPPLIES:
Plug-in used
Eye Candy 4000 Gradient Glow For Name (Optional)
Xero porcelain
 Xero Filters - Illustrator
Penta Filters - VTR2
 Brush Strokes – Crosshatch
 I used the artwork of Elias Chatzoudis You have to be licensed to use this
artwork and it can be purchased Now he has been at PTE but with them closing August 1, 2012 but you can buy his tube at his site here
  *Scrapkit Of Choice*
 I am using the Awesome PTU kit "
You can find the tutorial Here 
Hope you enjoy!
Some Beach - Tagger" by  HonoredScraps
And can be purchased ~ HERE
Thank you Patty for making such wonderful kits to create with :)
And Check Her other Kits HERE
Let Start Open up 700x700 Blank Canvas.
1.Click on your Frame1 background select all float defloat Open up your Beach Image Copy and paste as new layer Invert delete,
Apply Xero Filters - Illustrator with the following settings below,
Change the blend mode of the layer to Multiply. Highlight the bottom photo layer and ,
apply Penta Filters - VTR2 with the following settings below,
Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .



2.Click on your Frame2 background select all float defloat Open up your Beach Image Copy and paste as new layer Invert delete,
Apply Xero Filters - Illustrator with the following settings before,
Change the blend mode of the layer to Multiply. Highlight the bottom photo layer and ,
apply Penta Filters - VTR2 with the following settings before,
Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

3.Open up your Element_55 copy and paste as new layer Go to your Rectangle select all float defloat Invert delete,
Duplicates Image Mirror,Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

4.Click on your Frame 1 Select all float defloat Open up your Paper_13 copy and paste as new layer invert delete,
Apply Effects- plugin filters- AAA textures with those settings  below,PhotoEffex  Scanlines
with setting,below Apply Bevel with setting Below,Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .



5.Click on your Frame 2 Select all float defloat Open up your Paper_13 copy and paste as new layer invert delete,
Apply Effects- plugin filters- AAA textures with those settings  before,PhotoEffex  Scanlines
with setting,before Apply Bevel with setting before,Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

6.Click on your rectangle select all float defloat Open up your Paper_06 copy and paste as new layer invert delete,
Apply Brush Strokes – Crosshatch with setting below,


7.Open up your Element_76 copy and paste as new layer resize 60%,Duplicates Image Mirror,Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

8.Open up your Element_58 copy and paste as new layer resize 60%,Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

10.Open up your Element_21 copy and paste as new layer resize 60%x2,Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

11.Open up your Element_79 copy and paste as new layer resize 60%x2,Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

13.Open up your Element_02 copy and paste as new layer resize 60%x2,Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

14.Open up your Element_58 copy and paste as new layer resize 60%,Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

15.Open up your Element_42 copy and paste as new layer resize 60%x2,Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

16.Open up your Element_72 copy and paste as new layer resize 60%x2,Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

17.Open up your Element_05 copy and paste as new layer resize 60%x2,Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .
 Add the name and copyright info

Saturday, May 3, 2014

♥Live Laugh Love PTU♥



 This tutorial was written by me on May 3, 2014. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components.
*SUPPLIES:*
Plug-in used
Eye Candy 4000 Gradient Glow For Name (Optional)
DSB Flux Linear Transmission
Xero - Fritillary
Xero porcelain
♥Tube♥
 I used the artwork of Mayumi Ogihara You have to be licensed to use this
artwork and it can be purchased Here
  *Scrapkit Of Choice*
 I am using the Awesome PTU kit "Denim Daze - Tagger" by  HonoredScraps
And can be purchased ~ HERE
Thank you Patty for making such wonderful kits to create with :)
And Check Her other Kits HERE
 ♥
Let Start
Open up new Canva by 665x350 Transparent
  1.Select all Modify Select Selections Border With these setting Inside Border:10 Add new layer flood With #FFFFFF.

2.Select all Modify Select Selections Border With these setting Inside Border:10 Add new layer flood With Color from Kit.

3.Select all Open up your hs-denimdaze-Paper2 copy and paste into selections,Duplicate Go on the Original Layer
Adjust - Blur - Motion Blur with setting below,Go on Copy Layer Adjust - Blur - Radial Blur with setting below,
Apply Filter DSB Flux Linear Transmission with these setting below




4.Add new layer Flood with my pattern,select all float defloat Invert go to copy layer
Edit Cut,then select modify select selections borders bothside anti alias border width 2
Add/remove noise add noise with these setting below,again with these setting below
Add/remove noise add noise with these setting below,



5.Take your Selections draw rectangle add 3 new  layer  Open up your hs-denimdaze-Paper2 copy and paste into selections.
Apply Xero - Fritillary with these setting with 
Frist Layer
Second Layer
Third Layer



6.Open up your hs-denimdaze-Ruffle3 copy and paste as new Layer resize 40%,

7.Open up your hs-denimdaze-Blossom3 copy and paste as new Layer resize 60%,Duplicate Image flip

8.Open up your hs-denimdaze-livelaughlove copy and paste as new Layer resize 40%,

9.Open up your hs-denimdaze-Rose4 copy and paste as new Layer resize 40%,

10.Open up your hs-denimdaze-Butterfly6 copy and paste as new Layer resize 30%,

11.Open up your hs-denimdaze-Tag1 copy and paste as new Layer resize 40%,

12.Open up your tube select all float defloat invert delete,Apply Xero porcelain set at 50/128/128/0/0/255,On the duplicated tube layer, adjust, blur, Gaussian Blur set to 4
Layers, properties, change blend mode to screen,Apply DropShadow..Vertical & Horizontal 0, Opacity 50, Blur 5,Shadow on new layer - unchecked.


13.Add new layer Select all Modify Select Selections Border With these setting Inside Border:3
Apply FOTO FRAMES with these setting below,

Add the name and copyright info.
~*~*~Open animation~*~*~
Your layer palette should have all of the tag visible with only one animated layer showing, the other ones should have red Xs showing they are not visible. 
Click Edit-Copy Merged, go into Animation Shop and click Edit-Paste-As New Animation. 
Then back in PSP, close visibility on the first animated layer and open visibility on the next animated layer, again Click Edit-Copy Merged, then go into Animation Shop and right click on the image you just pasted there and choose Paste-After Current Frame. 
Repeat this for each animated layer and making sure each time in Animation Shop that you paste the new copy after the last frame of the image there
 

Friday, May 2, 2014

♥BeachyKeen PTU♥

 
This  tutorial was written by me on May 2, 2014. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components.
  Plug-in used
Eye Candy 4000 Gradient Glow For Name (Optional)
Xero Filters - Illustrator
Penta Filters - VTR2
Tube Choice:
I am using the Awesome art of  Monte Moore
And her art can be purchased at ~ HERE    
 *Scrapkit Of Choice*
 I am using the Awesome PTU kit "BeachyKeen " by Freeks Creationz.
And can be purchased ~ HERE
Thank you Sandra for making such wonderful kits to create with :)
And Check Her other Kits HERE 
♥Let Start♥
Open up New Canvas 700x700
1.Open up your Frame copy and paste as new Layer resize 70%,Take your magic wand click inside expand by 10,
Open up your beach screen Copy and paste as new layer invert delete,Apply Xero Filters - Illustrator with the following settings below,
Change the blend mode of the layer to Multiply. Highlight the bottom photo layer and ,
apply Penta Filters - VTR2 with the following settings below,
Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .


2.Open up your sun copy and paste as new Layer resize 50%,Take your magic wand click inside frame go back to your sun
layer invert delete,Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

3.Open up your sand2 copy and paste as new Layer resize 70% Duplicates image mirror,
Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

4.open up your Sea Weed copy and paste as new Layer resize 50%,Take your magic wand click inside frame go back to your Sea Weed
layer invert delete,Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

5.Open up your Palm Tree copy and paste as new Layer resize 50%,Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

6.Open up your Tiki Mask copy and paste as new Layer resize 50%,Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

7.Open up your sand copy and paste as new Layer resize 50%,Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

8.Open up your Starfish copy and paste as new Layer resize 50%,Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

9.Open up your Beach Bundle copy and paste as new Layer resize 50%,Apply DropShadow Vertical & Horizontal:-0, Opacity 50, Blur 5, Shadow on new layer - unchecked .

10.Open up your tube select all float defloat invert delete,Apply Xero porcelain set at 50/128/128/0/0/255,On the duplicated tube layer, adjust, blur, Gaussian Blur set to 4
Layers, properties, change blend mode to screen,Apply DropShadow..Vertical & Horizontal 0, Opacity 50, Blur 5,Shadow on new layer - unchecked.
 Add the name and copyright info.